Injector Dynamics 1000cc Direct Fit Fuel Injectors - RSX 02-06
The ID1000 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community.
This series of innovations and "firsts"x have made it the new era in fuel injector performance.
Most popular -
Most copied -
Most versatile -
Features
7 Bar Maximum Pressure Capability of 7 bar
Smooth response at low flow
Dead time matched sets
Full dynamic characterization provides data you need
Plug and play in nearly any application
Specifications:
Typical Flow Rate in CC per minute: 1015cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical connector type: EV6 / USCAR
Injector Body Design: Metal and composite plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore: 11mm
Diameter or style lower o-ring or cushion - Dash 204 square o-ring and Denso square o-ring
Part #: id1000.48.14.14.4
The price is TOO LOW TO LIST, message us for the LOWEST possible price!!
Warm regards,
Dan
The ID1000 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community.
This series of innovations and "firsts"x have made it the new era in fuel injector performance.
Most popular -
Most copied -
Most versatile -
Features
7 Bar Maximum Pressure Capability of 7 bar
Smooth response at low flow
Dead time matched sets
Full dynamic characterization provides data you need
Plug and play in nearly any application
Specifications:
Typical Flow Rate in CC per minute: 1015cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical connector type: EV6 / USCAR
Injector Body Design: Metal and composite plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore: 11mm
Diameter or style lower o-ring or cushion - Dash 204 square o-ring and Denso square o-ring
Part #: id1000.48.14.14.4
The price is TOO LOW TO LIST, message us for the LOWEST possible price!!
Warm regards,
Dan
HUGE DISCOUNT on Injector Dynamics 1000cc fuel injectors!!!
0 commentaires:
Enregistrer un commentaire