mercredi 30 novembre 2016

FS: Innovative Replacement Mount Kit

Purchased these brand new from THMotorsports, never installed or even test fit.

Price is $230
or
Trade for 05-06 OEM headlights (no yellowing/fading or broken tabs, must be in excellent condition)

Located in Manhattan Beach


Part #: 90650-60A
60A Red Bushings – Up to 250HP – These bushings are recommended for street cars. Most of kits come standard with these bushings. 60A bushings provide the least amount of vibration transferred from the engine to the chassis. This equates to a more comfortable everyday ride.











FS: Innovative Replacement Mount Kit

FS: Black Hybrid Racing Fuel Rail and Metal Modulo Integra Door Sills

Selling a Black Hybrid Racing Fuel Rail that I bought from someone but never installed into my car. It already has the -8AN Middle Fitting with Line as shown to hide the gas line. I'm asking $160 Shipped for it OR BEST OFFER Picked up as well.

Also Selling Optional Metal Modulo Integra JDM DC5 Door Sills in good condition. The Integra Plate can be taken off and Type R or Type S plates can be installed to replace it. I'm asking $180 Shipped for it OR BEST OFFER Picked up as well.

Leave you contact info here or PM me and i'll respond quickly. Located in San Diego.


















FS: Black Hybrid Racing Fuel Rail and Metal Modulo Integra Door Sills

Cars & Coffee Meet in the Antelope Valley this Fri, December 2



Date: 12/2/2016

Location: Liquid Bean Coffee House - 1711 W Avenue K, Lancaster, CA 93534
Time: 7:00pm until whenever - Show Up Anytime!

We do ask that you abide these GUIDELINES

Antelope Valley Auto Enthusiasts Meet Page
Antelope Valley Auto Enthusiasts Instagram

Photo courtesy of J-Rey Photography


Cars & Coffee Meet in the Antelope Valley this Fri, December 2

New Member

Just wanted to say thank you for allowing me to join! :)


New Member

Vtec no longer engages, lacks power, and sounds different

So, i drive a 02 rsx type s. i did an oil change and changed the spark plugs. I always run with Royal Purple with the K&N oil filter. I usually use NGK plugs but i decided to try out bosch. I cranked the car on once i was done and noticed that the car sounded different and drove very sluggish and vtec doesnt engage anymore. It threw a CEL, took it to o' reilly's and it was for the camshaft position sensor which i replaced both. Took it to autozone and they said it was the variable valve timing control phase gap malfunction but they said i should try to start by swapping back to NGK plugs. So far, i've changed both camshaft positioning sensors and the plugs and is still running the same. Has anyone ever experienced this? Any ideas on what might needs to be changed? I would love the help. Thanks in advance!


Vtec no longer engages, lacks power, and sounds different

Ep3 fuel pump VS Base RSX fuel pump?

I have a base with a bad fuel pump. I don't want to spend more than 100$ at a junk yard or 300$ for a new one. I found a guy parting out his Ep3 and wanted to know is there a difference between the fuel pumps?(Ep3 & Base RSX)
Would love for a quick response since I'm going to go a head an buy it soon. But would prefer a second opinion on this lol!
THANKS IN ADVANCE. AND GOOD CHEERS


Ep3 fuel pump VS Base RSX fuel pump?

Radiator's reservoir issue

Hi Guys,

My radiator coolant is usually low well below the MAX line whenever i check it. But whenever i fill it up, and drive for a while, after parking and turning my car off, the coolant starts to leak from the reservoir. Today i noticed it comes out from the hole with a rubber on it just behind the reservoir's cap. it only happens on a hot day.

Can someone explain me what that hole is for? Is it for over flow? And would it be because i fill the reservoir to the max? Or something wrong with the reservoir.

Thanks



Radiator's reservoir issue

mardi 29 novembre 2016

Coin Holder

There are two metal 'rivets' that hold the coin holder into the dash at the bottom of the coin holder. I lost one of them. Anyone know the name or part number for these? The coin holder is near driver left knee.


Coin Holder

RACELEGAL X CARMEATS 7 Friday DEC 02, 2016

Racelegal X Carmeats 7
Imports VS. Domestics

EVENT PAGE
http://ift.tt/2gtTezX

$10 - SPECTATE
$30 - RACE (must have helmet, pants, and no leaking)
helmet rentals available at the race.

Qualcomm Stadium
9449 Friars Rd
San Diego CA

6PM-Midnight

trophies
best import
best domestic
instagram fame
most team members





RACELEGAL X CARMEATS 7 Friday DEC 02, 2016

Will an 8 ounce aerosol can suffice for my front lip?



Will an 8 ounce aerosol can suffice for my front lip?

lundi 28 novembre 2016

Not happy with my retrofits....should I be?

Hey all, finished a retrofit conversion on my 02 headlights a couple weeks ago and have been on the fence with my feelings about them, I like the cutoff but i don't love the brightness/clarity or distance.

To start with a (totally unfair) comparison highlighting the differences between my lights and others:
(All photos taken on the same night and from the same-ish distance)

My retros:


16' Porsche Macan w/ led (though i believe these use a xenon projector as the main headlight with leds for DRL and supplementary light)


10' Porsche Panamera xenons


Obviously I'm not expecting porsche level quality/features....but is there anyway I can get similar clarity.
I actually prefer my sharper cut off, but they just aren't that bright.....currently fitted with 5300k bulbs and cheap generic ballasts(do they really make that much of a difference????)

FYI: I actually have found i prefer some other OEM projectors to those fitted in Porsches, but the porsche lights are more then adequate and its the only make I had multiple available to compare


Not happy with my retrofits....should I be?

FS/Parting Out: NHBP 05 RSX base

So about 2 weeks ago, it was super windy in the SFV and the tree branches in front of my house broke off and totaled both my RSX and Element. Insurance claimed both my cars as salvaged. So bought my car back from the insurance company and parting out all my aftermarket parts.

I'll try and get to removing all the parts throughout next weekend Or whenever i'm free (going to school and have 2 jobs)

So far all i can think of thats on my car are:

Jdm tails $350
Headlights TSX projector retrofit $350
JDM rep Rear lip $100
Spoiler $100
Hks 300
AEM Intake w/carb sticker 100
Function Form type II Coilovers $850
Rpf1 17x9 (can't remember the offset, ill get back to this) $850
Pioneer 700
12" Type r sub and box $300
Ingalls rear camber kit $100

Sorry for the lack of pictures, i'm just posting this before i go to work. (ill post up pictures soon)

Txt me at 818.800.8772


FS/Parting Out: NHBP 05 RSX base

Hey guys

Newbie here with my jdm type r dc5 hope to use the forum to get ideas and source parts right now I'm looking for an arc intake and feeder pipe if anyone knows of a set up for sale!?

I'm from the uk so would be good to see all your rsx's

Here's my car

Attachment 525097Attachment 525105


Sent from my iPhone using Tapatalk

Attached Thumbnails
Click image for larger version Name: IMG_9762.JPG Views: N/A Size: 75.1 KB ID: 525097  Click image for larger version Name: IMG_9769.JPG Views: N/A Size: 77.2 KB ID: 525105  


Hey guys

salvaging 2004 rsx type s (silver)

salvaging my car cause the cost to repair it is just to much for me..

:( :'( :(


engine is still good works perfectly 110xxx mi


salvaging 2004 rsx type s (silver)

I need help identifying these!!

I hit a curb this morning, and am in desperate need for a new rim of the same type. I'm not sure what make/model it is. Does anyone have any idea where I could start to look?
Attachment 525073
Attachment 525081
Attachment 525089

Attached Thumbnails
Click image for larger version Name: unnamed.jpg Views: N/A Size: 810.7 KB ID: 525081  Click image for larger version Name: unnamed (1).jpg Views: N/A Size: 783.3 KB ID: 525089  
Attached Images
File Type: jpg damagedrim.jpg (1.20 MB)


I need help identifying these!!

Black DC5 Itr interior door panels

Hello, I'm looking to see a pair of jdm dc5 black door panels. They're in very good conditions, never got to install them. Selling them for $195.

Attached Thumbnails
Click image for larger version Name: IMG_20161128_104727.jpg Views: N/A Size: 788.7 KB ID: 525065  


Black DC5 Itr interior door panels

WTB stock 06-S intake or WTT a AEM V2 for stock intake

Looking to buy a stock intake for a 06 Type-S. I do have a AEM V2 that I'm willing to trade+cash for a stock intake as well. Needing one ASAP, so PM me or text me 619-204-6036 for pics. Looking to buy or trade asap.


WTB stock 06-S intake or WTT a AEM V2 for stock intake

Diode Dynamics Cyber Monday Sale! Save 20% storewide w/code: CYBERMONDAY




CYBER MONDAY SALE STARTS NOW!





Don't miss out on this year's biggest sale!

Use code: "CYBERMONDAY" for 20% off your entire order! Sale Ends Tonight (Midnight CST)

This promotion cannot be combined with any other promotions or discounts. Excludes orders placed prior to 2:00 PM CST 11/22/2016.

Thanks everyone, and have a great Thanksgiving!


Diode Dynamics Cyber Monday Sale! Save 20% storewide w/code: CYBERMONDAY

HELP what rim is this and where can i get another one??

I just broke my rim this morning, and I need another one. I'm not sure what brand it is, as it came with the car when i bought it last year. I have looked for serial numbers without taking the rim off, and couldn't find anything. Does anyone know where I could begin looking for a replacement?

Attachment 525041
Attachment 525049

Thank you to anyone who can help!!

Attached Thumbnails
Click image for larger version Name: unnamed (3).jpg Views: N/A Size: 423.2 KB ID: 525049  
Attached Images
File Type: jpg damagedrim.jpg (1.20 MB)


HELP what rim is this and where can i get another one??

dimanche 27 novembre 2016

Stolen Blue Acura RSX Type-S

My BLUE 2003 Acura RSX Type-S was stolen late Saturday(11/26) or early Sunday(11/27) from my apartment complex in Seattle. I am offering a $1000 reward to whoever finds it. It's a blue 6-speed. Licence plate 828YWQ. I'm not prosecuting anyone. I just want my car back.


Stolen Blue Acura RSX Type-S

Hello babe!

Hello to all,

I am new member into this board. I would like to say hello to all.

Thanks for your time!


Hello babe!

samedi 26 novembre 2016

HID Projector Issue

Mods: I apologize in advance, but I originally put this in "Lighting". Thought I'd get better viewing here.

05 Base. RSXretrofits.com Projectors. Maybe a year and a half old.

Problem popped up. When I turn on the switch, sometimes the headlights don't come on. Sometimes one comes on, sometimes the other, both, or none. Parking lights come on all the time. If I turn off, then back on they come on. But I may have to do that once or several times.

The diference between this issue and others that I've read about is how its one or the other or both acting up.

The ballastes are mounted to the bottom side of the headlight housing

Doesn't matter if its the first turn on in the morning, a stop during a drive, or afterwork. Sometimes they work fine for days at a time.

It was the whole kit from rsxretrofits


HID Projector Issue

Flickering battery light

Hi Guys, I am really frustrated and I need your help

I own a 2002 RSX-S, i have been facing an issue where the battery light keeps flickering once the engine is on. (the light stays lit when the accessories only are being powered which is normal and implies that the bulb behind the dash is not the issue)

My electrician tested the the alternator by spinning it with a drill and the test shows that the battery is being charged and the alternator is doing its job however each time we install the alternator within the car and turn the engine the light begins to flicker again.

The electrician ran an independent low voltage line with a bulb to bypass the ECU to ensure the ECU wasn't the prob, that independent line still flickers as how the dash would.

We threw water between the belt and the alternator pulley while spinning and we noticed for the time that the water was being thrown the battery light stayed off but as soon as the water stopped pouring the flickering came back.

I thought it was the belt slipping so I did some research, found out i should be using a 7pk1715 belt while i had a 7pk1740 currently installed.

I went ahead a bought a belt today 7pk1722 because the 1715 was inaccessible however the flickering still remains.

I am really frustrated to the point where i would hand over my car to a random person and tell them to have it.
This is my first car and i would love to find the problem, is there anything else that can be affecting this?


Flickering battery light

Kraftwerks race kit c38-91 black series+++

Bought brand new from teknotik in december 2014. Installed it last year in october 2015 and tuned it in march of 2016. Only put down 8000km on it and she is still amazing!

This kit is over 4000 new for just only the rotrex, brackets, oil cooler, filter, bottle of rotrex oil and 105mm pulley.

This will come with a TTS ROTREX intercooler and race radiator combo for ep3 and it should fit rsx since inhave a em2 and the radiators are interchangeable from the UK with a tial q50mm black bov with a sc spring. This cost me 2000 cdn when you convert it minus the bov.

This is pretty much everything you need except you need injectors and chabge clutch. My car made 226/160 NA to 386/241 rotrex power on a safe tune!

Would like to sell her altogether for $5000. Can sell it seperately as well.

$5000 or best offer. Will accept trades for a turbo kit plus cash on my end if so.

New price 4500 OBO!!!

LOCATED TORONTO, ONTARIO, CANADA

BUYER PAYS SHIPPING IF OUTSIDE COUNTRY.


Kraftwerks race kit c38-91 black series+++

vendredi 25 novembre 2016

🔥💵🔥Black Friday // Cyber Monday🔥💵🔥 - Largest Sale EVER!



Black Friday // Cyber Monday savings starts NOW at XenonDepot! Check out our LARGEST SALE EVER and save on every product we offer!

Whether you’re looking for an LED Upgrade, HID Upgrade or just some Halogen Replacement Bulbs for your vehicle, we’ve got EVERYTHING you need to illuminate your night-time drive.

Act now to take advantage of our great Black Friday // Cyber Monday deals! Shop NOW at XenonDepot!


🔥💵🔥Black Friday // Cyber Monday🔥💵🔥 - Largest Sale EVER!

Made a "Big Brake kit"

I made/assembled a big brake kit for my 04 Type S that used the RL calipers and 350Z Rotors. I took dimensions, modeled a bracket using CAD, and machined the brackets to the drawing.

The fit is TIGHT. It has about 1-1.5mm clearance between rotor and caliper on all surfaces inside the rotor channel. The fit with the wheel I am running is also tight. (see photos)

I have been running this setup for a few months now and it is performing very well. I did not change any of the lines, brake cylinder, or proportioning valve. The car brakes a little heavy front and you can feel the rear want to push around if you are braking moderately hard around a corner while going 60+. Upgraging to an adjustable proportioning valve would help this I believe. The ABS still works normally to prevent lockup.

Thought some of you might be interested.

Other info:
Rotor: 2006 350Z (Brembo); Dia-324mm; no hubcentric ring ( it's pretty close ;))
Caliper: 2006 Acura RL 4-pot
Wheel: 17", 45mm offset

Pardon the dusty wheels.







Made a "Big Brake kit"

jeudi 24 novembre 2016

Any idea what's the problem?

http://ift.tt/2gmlNyt

Only makes the noise when car is been driven for 45mins or more when engine temp is hot, still drives fine no problem just the noise gets annoying


Sent from my iPhone using Tapatalk


Any idea what's the problem?

OneofFew from Maryland

Hello,

6 months ago I purchased a 04 RSX-S and it is my first performance oriented Acura/Honda. Other than it being pretty ragged out and having a bunch if issues it has been a lot of fun to drive and am quite happy with the experience.

I have been checking out these forums for the past 6 months reading over older posts to get advice on aftermarket parts and improvements. I hope to be returning the privilege and adding some useful information in the near future that I have experienced.



OneofFew from Maryland

base *CHAT* - Shy guys, candle wax, aggressive girls, and Canadians

Here's to being thankful for you weirdos :fistbump:


White_02 474
AzianK 467
RecarosCostTooMuch 227
CyborgGT 181
itskien 152
fightthisfight 88
Dad 62
DC5_Trendy 62
Ransom 51
Xander 20
Moises's_Rsx 19
kittyy 12
VanTypeS 11
overlap king 7
piller97 7
peterrpham 7
yoon 5
Prezes5 5
iThinkImJoey 2
Hyoriu 1
Lauren 1




Previous mess :: http://ift.tt/2gkGF9h


base *CHAT* - Shy guys, candle wax, aggressive girls, and Canadians

New here

New to the forum been reading threads for a while just decided to join
From NJ but in the TN area Now

I have a 03 RSX Base 5speed
its still a A3 for now i also have a A2 block in almost done building
For now just seeing what i can get out of the A3
its Bolt-ons and K-pro with bumped compression lowered on Tien Springs but thats about it
Attachment 524754

Attachment 524762

Attachment 524770

Attachment 524778

Attached Thumbnails
Click image for larger version Name: 15055812_1788408314747393_6226652494528644279_n.jpg Views: N/A Size: 237.3 KB ID: 524754  Click image for larger version Name: 14956632_1785946758326882_7735439205193422980_n.jpg Views: N/A Size: 76.3 KB ID: 524762  Click image for larger version Name: 14716166_1778047669116791_1984347602752162997_n.jpg Views: N/A Size: 88.7 KB ID: 524770  Click image for larger version Name: 14610887_1778037902451101_1857816649587476492_n.jpg Views: N/A Size: 105.3 KB ID: 524778  


New here

mercredi 23 novembre 2016

05+ JDM DC5 TYPE R Front Bulkhead Radiator Assy

Hi! I thought I'd share what I just received today from Japan




Looks like a size of a fridge





I bought this whole frame assembly of this Type R Front Bulkhead and Radiator Support because I'm having an alignment issue between my front bumper and my headlights plus the fenders. I highly suspect that this RSX got into an accident which it didn't reflect on the carfax reports way back in 2011 which I also bought this car from a local dealer in Cypress, CA. Another thing is Type R bulkhead radiator frame assy has a different part number from our usdm ones and it is way much stronger and lighter than Type S ones. The price of the frame is reasonable but shipping cost expensive but it's worth it. I'll post more pictures tomorrow.


05+ JDM DC5 TYPE R Front Bulkhead Radiator Assy

Need help

Need some help.
I got a 2002 rsxs and I have issues with starting my car. Mods is only AEM v2 intake.

When starting my car, no immobilizer light (green key light on dash) comes on. Car won't start. Plugging in a obd2 scanner, car still don't start.

When plugging in my hondata kpro (disabling immobilizer) car don't start. But when plugging in a obd2 scanner, car starts up and runs fine.

Any ideas what would cause this?

I don't want to keep the hondata in my car. It's not mine. I just want the car running without anything plugged in

Thanks for the help in advance


Need help

set of 4 rsx oem rims excellent condition $$1500$$

Hello ladies, this is a rare set of 4 OEM acura rsx rims from an 03

It is in great condition as you can see here, the other 3 are the same ...no dings or rashes like that..shocklingly good condition..just needs a clean

Comes with OEM center caps as well


location is mississauga



:chuck:


set of 4 rsx oem rims excellent condition $$1500$$

Black Friday Sales Preview | Starts The 24TH



: wes2:


Black Friday Sales Preview | Starts The 24TH

05-06 Conversion Question

So I am going to be doing the 05-06 conversion I am using this thread as a guide

http://ift.tt/2fouGXz

So I ordered the Parking/City Light Sockets, but what is the 9005 harness and bulbs for the high beams? I'm guessing that the 02-04 high beams are H1 whereas the 05-06 is a 9005 high beam which is the need for the new harness and bulb. Just want to make sure I was right before I go ahead and order the harnesses and bulbs.


05-06 Conversion Question

mardi 22 novembre 2016

how hard should it be to spin the flywheel / ring gear

So i was having starting problems, searched all the old threads and i think it is the starter and nothing else. but i just want to verify that my flywheel/ring gear arnt too stiff because of rust and what not,

I can kinda spin it counter clock wise but it takes levrage with a screw driver. and i cant spin it clockwise at all, Does that make sense. Or should i be able to spin it with my bare hand easly enough. ( all while the car is in neutral. )

im also sure its the starter because i can no longer to get the gear to spin. the pinion will come out but no longer spin. that i can move in one direction easly enough by hand.

Thanks for any help/ advice, this is my first car that ive done any real projects/ maintaince on


how hard should it be to spin the flywheel / ring gear

Diode Dynamics Black Friday Sale! Save 20% on orders over $100 w/code: BLACKFRIDAY




Black Friday SALE STARTS NOW!





This promotion cannot be combined with any other promotions or discounts. Excludes orders placed prior to 2:00 PM CST 11/22/2016.

Thanks everyone, and have a great Thanksgiving!


Diode Dynamics Black Friday Sale! Save 20% on orders over $100 w/code: BLACKFRIDAY

Noob Here.....

Morning,
My name's Christian and I'm from Orange County, California. I just purchased a 2002 Acura RSX Type-S with 186,500 miles, White Diamond Pearl, $4000. She has a pretty noticeable scratch on the left side of the front bumper, but the original owner was kind enough to give me some OEM touch up paint. The rest of the car is in very good condition for its age. The paint still shined and no chipping. Very minimal rust on the undercarriage but the engine bay was bit dirty. The interior did not look its age. Leather was a bit cracked, but the rest looked great. She was a one-owner vehicle who kept it stock except for the OEM replacement of the AC compressor.

Reasons I bought this car:

1.Reliability. It's a Honda.

2. Sportyness. I'm coming from having a motorcycle (Yamaha FZ07) as my one and only vehicle. If you know anything about that bike is that it's a blast to ride, especially in the canyons. I refused to spend my hard earned cash on a boring vehicle, especially an automatic trans :thumbsdow:. I needed something fun. Vtec was the answer.

3. Budget. My budget was 6k. Finding a car that would compete with my bike (0-60 3.4 sec.) with that budget was unrealistic, so I started researching "sporty", reliable, cars within that budget. After some long hours of research, the RSX it was.


I found this forum through a google search, and was happy I found it. I know it's an old forum since the RSX is a teen now, but I believe this is a good place for info. I'll admit, I'm a huge noob when it comes to cars. I can perform basic maintenance (spark plugs, brake pads, oil, etc.) but that's it. When it comes to performance mods, I'm clueless. I just found out what a coilover was a few minutes ago. This forum is hopefully going to cure my noob disease. There's so much information, I don't really know where to start :dontknow:.

I would ask the usual dumb questions of, "What should I mod first?", or "What are the best mods?", but I know that's a big no-no. There's a search button for that.

Nonetheless, I would still greatly appreciate any advice you have. I have a lot to learn and any information is helpful.

Thanks,
Christian

(I'll post a pic of her in a bit.)


Noob Here.....

Early Black Friday Deals!



Early Black Friday Deals!

Popular Posts

Categories

Unordered List

Text Widget

Blog Archive

Followers

Fourni par Blogger.